Injection Unit | Units | 1050emII (100) | 1050emII (160) |
---|---|---|---|
Screw Diameter | mm | 90 | 105 |
Theoretical Injection Capacity | cm3 | 2,860 | 4,540 | Injection Mass Polystyrene (PS) | g | 2,630 | 4,180 | Injection Mass Polyethylene (PE) | g | 2,120 | 3,360 | Maximum Injection Pressure | MPa | 177(1,800) | 177(1,800) | Maximum Holding Pressure | (kgf/cm2) | 147(1,500) | 147(1,500) | Injection Rate | cm3/sec | 795 / 1,015 | 1,385 | Plasticizing Capacity Polystyrene (PS) | kg/hr | 470 | 630 | Plasticizing Capacity Polypropylene (PP) | kg/hr | - | - | Screw Speed | rpm | 160 | 152 | Injection Power | kW(PS) | 140(190) / 180(245) | 152 | Injection Speed | mm/s | 125 / 160 | 160 | Nozzle Touch Force | kN(tf) | 59(6.0) | 59(6.0) | Screw L/D | - | 22 | 22 |
Clamping Unit | Units | 1050emII (values) |
---|---|---|
Mould Clamping Force | kN (tonf) | 10,290(1,050) |
Mould Opening Force | kN (tonf) | 608(62) |
Mould Open/Close Speed | m/min | 50 | Platen Size (H x V) | mm | 1,900×1,900 | Tie-bar Space (H x V) | mm | 1,300×1,300 | Max. Clamp Stroke | mm | 1,750 | Max. Daylight | mm | 2,250 | Mould Thickness | mm | 500~1,100 | Ejector Force | kN (tonf) | 198(20.2) | Ejector Stroke | mm | 200 | Ejector Speed(forward/back) | m/min | 12.6 | Max. Mould Weight | t | 14 |
General Unit | Units | 1050emII (100) | 1050emII (160) |
---|---|---|---|
Heater capacity | kW | 33.7 | 47.5 |
Machine dimensions (L x W x H) | m | 10.3×3.2×3.0 | 10.3×3.2×2.9 |
Weight | ton | 49 | 53 |
A-31, Ground Floor, Sector - 59, NOIDA,
201301 (U.P.) , INDIA.
Mobile No.+91- 8800741922, 8958356479
Email:sales@lkc-mosoco.in